|
EPA Waste Codes (D-List) |
|
|
Code |
Description |
|
D001 |
Ignitable waste |
|
D002 |
Corrosive waste |
|
D003 |
Reactive waste |
|
D004 |
Arsenic |
|
D005 |
Barium |
|
D006 |
Cadmium |
|
D007 |
Chromium |
|
D008 |
Lead |
|
D009 |
Mercury |
|
D010 |
Selenium |
|
D011 |
Silver |
|
D012 |
Endrin (1,2,3,4,10,10-hexachloro-1, 7-epoxy-1,4,4a,5,6,7,8,8a-octahydro-1, 4-endo,endo-5, 8-dimeth-ano- naphthalene) |
|
D013 |
Lindane (1,2,3,4,5,6-hexachlorocyclohexane, gamma isomer) |
|
D014 |
Methoxychlor (1,1,1-trichloro-2,2-bis[p-methoxyphenyl] ethane) |
|
D015 |
Toxaphene (C10H10ClN, Technical chlorinated camphene, 67-69 percent chlorine) |
|
D016 |
2,4-D (2,4 Dichlorophenoxyacetic acid) |
|
D017 |
2,4,5-TP Silvex (2,4,5-Trichlorophenoxypropionic acid) |
|
D018 |
Benzene |
|
D019 |
Carbon tetrachloride |
|
D020 |
Chlordane |
|
D021 |
Chlorobenzene |
|
D022 |
Chloroform |
|
D023 |
o-Cresol |
|
D024 |
m-Cresol |
|
D025 |
p-Cresol |
|
D026 |
Cresol |
|
D027 |
1,4-Dichlorobenzene |
|
D028 |
1,2-Dichloroethane |
|
D029 |
1,1-Dichloroethylene |
|
D030 |
2,4-Dinitrotoulene |
|
D031 |
Heptachlor (and its epoxide) |
|
D032 |
Hexachlorobenzene |
|
D033 |
Hexachlorobutadiene |
|
D034 |
Hexachloroethane |
|
D035 |
Methyl ethyl ketone |
|
D036 |
Nitrobenzene |
|
D037 |
Pentachlorophenol |
|
D038 |
Pyridine |
|
D039 |
Tetrachloroethylene |
|
D040 |
Trichloroethylene |
|
D041 |
2,4,5-Trichlorophenol |
|
D042 |
2,4,6-Trichlorophenol |
|
D043 |
Vinyl chloride |
ALL CHEMICAL PRODUCTS MAY BE HAZARDOUS IF IMPROPERLY USED, HANDLED OR STORED. ALWAYS ENSURE THAT YOU HAVE CONSULTED THE LATEST MATERIAL SAFETY DATA SHEET (MSDS) FOR ANY CHEMICAL PRODUCT BEFORE USING, HANDLING OR STORING A CHEMICAL PRODUCT, AND THAT YOU ARE WEARING AND USING ALL APPROPRIATE SAFETY EQUIPMENT.
THE INFORMATION PRESENTED HEREIN, WHILE NOT
GUARANTEED, WAS PREPARED BY TECHNICAL
PERSONNEL AND IS TRUE AND ACCURATE TO THE BEST OF OUR KNOWLEDGE.
NO WARRANTY OR
GUARANTEE, EXPRESSED OR IMPLIED, IS MADE REGARDING PERFORMANCE,
STABILITY OR OTHERWISE.
THIS INFORMATION IS NOT INTENDED TO BE ALL-INCLUSIVE AS THE
MANNER AND CONDITIONS OF USE, HANDLING, STORAGE AND OTHER FACTORS MAY INVOLVE
OTHER OR ADDITIONAL SAFETY OR
PERFORMANCE CONSIDERATIONS. WHILE OUR TECHNICAL PERSONNEL WILL BE
HAPPY TO RESPOND TO QUESTIONS REGARDING SAFE HANDLING AND USE PROCEDURES, SAFE
HANDLING AND USE REMAINS THE RESPONSIBILITY OF THE CUSTOMER. NO SUGGESTIONS FOR
USE ARE INTENDED AS, AND NOTHING HEREIN SHALL BE CONSTRUED AS, A RECOMMENDATION
TO INFRINGE ANY EXISTING PATENTS OR TO VIOLATE ANY FEDERAL, STATE OR LOCAL LAWS.